Magnifying And Searching For Details; Selecting The Aspect Ratio - BenQ W1000 User Manual

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
1. Press MENU/EXIT and then press
2. Press to highlight Digital Zoom and press MODE/ENTER. The Zoom bar
displays.
3. Press on the projector repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press MODE/ENTER to switch to the paning mode and
press the directional arrows ( ,
5. To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out
functionality, and press AUTO to restore the picture to its original size. You can also
press repeatedly until it is restored to the original size.
The picture can only be navigated after the picture is magnified. You can further magnify the
picture while searching for details.

Selecting the aspect ratio

The 'aspect ratio' is the ratio of the image width to the image height. For W1000, the default
aspect ration is 16:9. Most analog TV and computers are in 4:3 ratio, and digital TV and
DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To change the projected image ratio (no matter what aspect the source is):
1. Press MENU/EXIT and then press
2. Press to highlight Aspect Ratio.
3. Press /
display requirements.
About the aspect ratio
In the pictures below, the black portions are inactive areas and the white portions are active
areas. OSD menus can be displayed on those unused black areas.
1. Auto:
Scales an image proportionally to fit the
projector's native resolution in its
horizontal width and vertical height.
This is suitable for the incoming image
which is in 4:3 or 16:9 and you want to
make most use of the screen without
altering the image's aspect ratio.
to select an aspect ratio to suit the format of the video signal and your
/ until the DISPLAY menu is highlighted.
, , ) to navigate the picture.
/ until the DISPLAY menu is highlighted.
4:3 picture
16:9 picture
Operation 31