Configuring The Settings From Argo Face200T Web Page - Matrix COSEC ARGO FACE200T Manual

Checking the Connectivity Status
Device is Connected
Figure 31: Tap About Device
27
If you enable the Auto Add New Devices check box in the
Server (Admin Module > System Configuration > Global
Device is Disconnected
Policy > Device) the device will be added automatically. You
can also add the device later manually.The Status will be
online only if the Device is added in the Server.
Make sure the Monitor Service is running.
Configuring the Settings from ARGO FACE200T Web
Open the Web Browser in your computer.
•
Enter the IP Address of the COSEC ARGO FACE200T,
•
default:
and press the Enter key on your computer keyboard.
The Login page appears as shown in Figure 34. Enter the
•
default User Name as Admin. You need to set the password,
Figure 32: Tap Connectivity
hence enter the desired password in New Password and re-
enter the same in Confirm Password.
Click Login.
•
Figure 34
Figure 33: Connectivity Status
http://192.168.50.1 in the address bar of the browser
28