Directed 3100 Installation Manual page 16

3. Ign-controlled Locking
• ON: the door lock/unlock outputs activate when ignition is turned
on/off.
• OFF: the door lock/unlock outputs do not activate when ignition is
turned on/off.
Note: Doors must be closed for ignition lock to work.
4. Active/Passive Locking
• Active Locking: The doors do not lock when passively arming only
when using the remote.
• Passive Locking: The doors automatically lock when the system pas-
sively arms.
5. Door Lock Pulse
• 0.8 seconds: the door lock output pulses are 800mS in duration.
• 3.5 seconds: the door lock pulses are 3.5 seconds in duration.
6. Double Pulse Unlock
• OFF: the door unlock output provides a single pulse.
• ON: the door unlock output provides a double pulse.
7. Code Hopping
• ON: The code hopping portion of messages from the remote con-
trols are decrypted before a command is activated
• OFF: The code hopping portion of the remote control messages are
ignored resulting in possible range improvement.
8. Door Trigger Error Chirp
• ON: If the door trigger is active when arming, the siren emits 1
additional chirp to alert you.
• OFF: An active door trigger when arming does not generate an
alert output.
14
© 2012 Directed. All rights reserved.