Directed DBALL-GM10 XPRESSKIT Quick Reference Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Car Alarm
  5. DBALL-GM10 XPRESSKIT
  6. Quick reference manual
Directed DBALL-GM10 XPRESSKIT Quick Reference Manual

Directed DBALL-GM10 XPRESSKIT Quick Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Platform: DBALL
Firmware: GM10 v. 2.08+
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
Data override and door lock interface compatible with new generation GM vehicles with a
BLADE-type key (i.e. Camaro, Equinox and Lacrosse). The available features include:
Transponder override (no key required); door lock control; factory security control; trunk
release; door, hood and trunk sensing; tach sensing; and much more.
Refer to Quick Reference Guide (QRG) at the end of this guide for more information on how
to use the various features offered with this product.
Important:
This guide is compatible with the GM10 firmware version 2.08 and higher.
Index
Vehicle Application Guide................................................................................................................................................
Type 1..............................................................................................................................................................................
Vehicle Wiring Reference Chart - Type 1 (pages 4-6).....................................................................................................
Type 2..............................................................................................................................................................................
Vehicle Wiring Reference Chart - Type 2.........................................................................................................................
Installation with T-Harness...............................................................................................................................................
Programming
Module Programming.................................
Feature & Option List.......................................................................................................................................................
Feature Programming...................................................................................................................................................... 13
LED Diagnostics & Troubleshooting................................................................................................................................ 14
Limited One-Year Consumer Warranty............................................................................................................................ 15
† Buick, Chevrolet and GMC are registered trademarks and property of
..................................................................................................................... 10
their respective companies.
.
Rev.: 20130304
02
03
04
07
08
09
11
12
© 2012 Directed. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DBALL-GM10 XPRESSKIT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Directed DBALL-GM10 XPRESSKIT

Summary of Contents for Directed DBALL-GM10 XPRESSKIT

  • Page 1: Table Of Contents

    Module Reset & Hard Reset............................Feature & Option List............................... Feature Programming..............................13 LED Diagnostics & Troubleshooting..........................14 Limited One-Year Consumer Warranty..........................15 † Buick, Chevrolet and GMC are registered trademarks and property of their respective companies. © 2012 Directed. All rights reserved.

  • Page 2: Vehicle Application Guide

    RS: Remote Start & Engine Controls •: D2D and W2W DL: OE Door Lock & Alarm Controls SS: Integrated Security & Monitoring FOB: Sync CAN Interface w/ FOB Remote ST: Function/Feature Status PK: Transponder & Immobilizer Override © 2012 Directed. All rights reserved.

  • Page 3: Installation Type 1

    *** Use (-) Aux or any (-) trigger to activate the heated seats function during run time. † Heated seat feature must be enable, see Feature Programming (page 12). Wires are listed by pin numbers. This display is not representative of connector pin layouts, which are often stacked. © 2012 Directed. All rights reserved.

  • Page 4: Vehicle Wiring Reference Chart - Type 1 (Pages 4-6)

    Lt Green BCM, under driver-side dash, above driver-kick panel RAP OFF Gray Black Driver Window Motor, in driver's door SW CAN Dk Green Black OBDII CAN High Blue Black OBDII CAN Low White Black OBDII © 2012 Directed. All rights reserved.
  • Page 5 BCM, under driver-side dash, above driver-kick panel RAP OFF Gray Black 8 or 7 Driver Window Switch or Motor, in driver's door SW CAN Dk Green Black OBDII CAN High Blue Black OBDII CAN Low White Black OBDII © 2012 Directed. All rights reserved.
  • Page 6 BCM, under driver-side dash, above driver-kick panel RAP OFF Gray/Black Black Driver Window Switch, in driver's door SW CAN Dk. Green Black OBDII CAN High Tan/Black or Blue Black OBDII CAN Low Tan or White Black OBDII © 2012 Directed. All rights reserved.

  • Page 7: Type 2

    *** Use (-) Aux or any (-) trigger to activate the heated seats function during run time. † Heated seat feature must be enable, see Feature Programming (page 12). Wires are listed by pin numbers. This display is not representative of connector pin layouts, which are often stacked. © 2012 Directed. All rights reserved.

  • Page 8: Vehicle Wiring Reference Chart - Type 2

    SW CAN Dk Green Black OBDII CAN High Tan/Black or Blue Black OBDII CAN Low Tan or White Black OBDII Locating Components in the Vehicle Ignition Barrel Immobilizer Control Ignition Control Module ( Switch © 2012 Directed. All rights reserved.

  • Page 9: Installation With T-Harness

    * If the RAP OFF wire is not connected, the radio will turn OFF but some lights will remain ON in the central console for 10 minutes. Connect this wire (Green/Black, pin 2/12) to the driver door sense trigger (Gray/Black) to avoid the issue. Wires are listed by pin numbers. This display is not representative of connector pin layouts, which are often stacked. © 2012 Directed. All rights reserved.

  • Page 10: Module Programming

    Insert and turn the key back to the IGN position. The LED will Key IN & change to solid green for 3 sec. then OFF. START Solid Key OUT Remove the key from the ignition. START © 2012 Directed. All rights reserved.

  • Page 11: Module Reset & Hard Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds & until the LED starts to flash orange and red. Solid Flashes & Release the programming button. The LED turns ON solid red. Release Solid © 2012 Directed. All rights reserved.

  • Page 12: Feature & Option List

    A remote starter, for which the Safelock feature is active, will work perfectly with this option and will make it invisible to the user. * Default Option ** Do not use in vehicles without sunroof © 2012 Directed. All rights reserved.

  • Page 13: Feature Programming

    2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm end of the programming sequence © 2012 Directed. All rights reserved.

  • Page 14: Led Diagnostics & Troubleshooting

    If it does not flash, the bypass module did not receive the signal. Verify the connections between the bypass and the remote Flashes x2 Flashes Green twice Unlock function executed. starter module. Flashes Green 3 times Trunk release function executed. Flashes x3 © 2012 Directed. All rights reserved.

  • Page 15: Limited One-Year Consumer Warranty

    Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete...

  • Page 16: Quick Reference Guide

    3 times, then to activate x3 + the panic mode. Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. © 2012 Directed. All rights reserved.

Table of Contents