General Settings; System Tone And Shutdown Delay; Set Date And Time Manually; Set Date And Time Automatically - Boss Audio Systems ELITE BE12ACP.WX User Manual

System Settings
-�r�I-S�ttings
From the home menu, touch
[SETTINGS]
>
[General]
to access genera l settings.
System Tone and Shutdown Delay
[Key Beep]:
Enable or disable touch sound.
[Right Hand Drive]:
Change the Apple CarPlay
menu bar from the left side to the rig ht side of
the screen and vice versa. Restart you r vehicle to
make the change effective.
[Power
Off
Delay]:
Enable to keep the u nit
on for three seconds after accessory power or
veh icle is tu rned
off.
Enable shutdown delay if the unit restarts
d uring vehicle's cra n k to start.
Set Date and Time Manually
[Time]:
Touch to access time setting screen.
Swipe the time field u p and down to set hours,
m i nutes, and 1 2/24 hour format respectively.
[Date]:
Touch to access date setting screen.
Swipe the date field u p and down to set year,
month, and day respectively.
��
[Time Zone]:
Select a time zone i n you r current
location.
[Daylight Savings Time]:
Enable to adjust
Daylight Saving a utomatically.
Set Date and Time Automatica lly
[Projection Clock Sync]:
Enable to a utomatically
set date and time from Apple CarPlay.
[Set Automatically by RDS/RBDS]:
Enable to set
date and time from RDS/RBDS radio broadcast.
Language Setting
Select English or Spanish as menu language.
Steering Wheel Control Retention
The unit a llows you to retain your steering
wheel controls (SWC), via A) connection to a
steering wheel interface/adapter (not i ncluded)
or B) d i rectly to you r steering wheel control
harness if com patible with the SWC Learning
Setup. (P.3 1)
[SWC Fixed Settings]:
Select this option if
you r vehicle needs a steering wheel interface/
adapter (not included). (P.3 1)
Follow the instructions of your steering wheel
i nterface/adapter to program the unit's audio
and video functions on you r steering wheel
controls.
[SWC Learning Setup]:
Select this option to
access function programming if you r vehicle
does not need a steering wheel interface/
adapter for SWC connection. (P.28)
1 . Touch
[Reset]
to enable programming mode.
2. Touch a function from the mapping chart,
then hold down a button on the steering
wheel to set the function .
If progra m m i ng fails, touch
◄
or
►
to
try low, mid or high resistance option for
programming success.
3. Repeat Step 2 to program the other
functions. After all mappings com plete,
touch
[Confirm].
(
CD
IMPORTANT NOTE )
The mapping tool with resistance options is not
compatible with a l l veh icles.
If programming fails after trying low, mid a nd
high resistance options, you r vehicle needs a
steering wheel interface/adapter (not included)
for SWC retention.