Sears PRO-FORM 535LE User Manual page 10

Ifthedisplayed h _eart rateappears to betoo high
ortoo10w, o rif yourheartrate
is not displayed, lift
your thumb off the sensor and allow the display to
reset. Press down again on the sensor as de-
scribed above. Make sure that your thumb is posi-
tioned as shown, and that you are applying the
proper amount of pressure to the pulse sensor.
Try the sensor several times until you become
familiar with iL Remember to stand still while mea-
suring your pulse.
THE INFORMATION MODE
To access the informationreedS, hold down the STOP/
RESET button while inserting the key into the console.
An "E," for english miles, or an
"M," for metric kilometers, will
appear in the DISTANCE/
LAPS display. Press the
SPEED Z_button to change
the unit of measurement.
IE 1
_ DISTANCE LAPS_
r_ When you are finished, remove the key.
S e° °te t F
and remove the key
from the console. Keep
the key in a secure
place.
In addition,movethe on/offswitchto the off posi-
tion.(See the drawingnear the bottomof page 8.)
The TIME/PACE display will
show the total number of
hours the treadmill has been
used.
The SPEED display will show
the total number of miles that
the walking belt has moved.
Il ,, 11
TIME PACE
To exit the information mode, remove the key from the
console.
iO