Table of Contents
Advertisement
Step 1. Fitting the dishwasher in place
1. Loosen the lock nuts on the dishwasher's two
front steel feet using a /8 inch (1mm) open-
ended wrench. Screw the lock nuts down as
close to the floor as possible.
. Adjust the height of the dishwasher by turn-
ing the front steel feet with your hands. Leave
enough space to adjust them later.
. Screw in the back foot completely by turning
the adjustment screw at the front counter-
clockwise. Use a flat-bladed or
driver.
a 1/ inch nut
Customer Care Center
1-800-898-1879
www.askousa.com
Hide quick links:
Advertisement
Table of Contents
