Asko D5893XXL Operating Instructions Manual page 33

Installation and connection information
dIShwAShER CAvITY mEASUREmENTS
Cable hole
2-4"
50-105 mm
W = 24"
W = 610 mm
DISHW�SHER ME�SUREMENTS
With fill strips**
H minimum
With toe kick -1/", 870 mm
(see Steep 7)
Without toe kick -1/", 870 mm
* With fill strips and without plastic feet.
** ASKO XLFI dishwashers can be installed either with or without accessory fill strips depending on the type
of installation. If the dishwasher cutout has been cut to European widths of 23-5/8" (600 mm), the unit won't
require fill strips. If the dishwasher cutout is a standard 24" wide, we have fill strips that make the unit 24"
(610 mm) wide.
*** Without plastic feet.
1-3/4"
44 mm
*
H maximum
**
", 890 mm
-1/8", 90 mm
Customer Care Center
1-800-898-1879
www.askousa.com
H - see table below
Make sure the edges of the cable
hole are even to avoid damage to
the drain and supply hoses and
the electric cable.
34-1/4 to 36-1/8"
870-920mm
Without fill strips
H minimum
***
-/", 80 mm
-/", 80 mm
H maximum
-/8", 880 mm
-/", 910 mm