Asko D5893XXL Operating Instructions Manual page 34

Installation and connection information
wATER CONNECTION
• The machine can be connected to a cold or
hot water supply (maximum 10°F, 8°C).
However, we recommend connection to a
cold water supply.
• The inlet pipe has a connector with either a
9/1" internal thread.
ElECTRICAl CONNECTION
• 10VAC mains voltage, minimum 1A.
DR�IN�GE
• The supplied cone-shaped connector fits a
drain connection with an internal diameter of
1/, /8, / and 7/8
 mm).
• Use a hose clamp if connecting to a fixed drain
(sink).
The connector is ready to cut to the desired
drain connection size. Only a clamp is required.
CAblE/hOSE lENgThS
Drain hose: 9 inches (190 mm)
Supply hose:  inches (170 mm)
Power cable:  inches (1770 mm)
TOOLS
1) Flathead screwdriver
) Open-ended wrench
/8 inches (1 mm)
) Tape measure
) Spirit level

inches (1, 1, 18 and
Customer Care Center
1-800-898-1879
www.askousa.com