Delay; Delay Extra; Effect Type - Korg microKORG2 Owner's Manual

microKORG2
EFFECT, EQ section - DELAY
An effect that delays the signal and creates and echoing sound.
•
Press the DELAY button while holding down the ON/OFF button to turn the effect on/off (the LED below
the button lights up when the effect is on).
•
Press the DELAY button to access the related parameters (the button blinks). Use the EDIT CONTROL 1–5
knobs and the FUNCTION 1, 2 buttons to set the value.
•
Long-press either the MOD, DELAY or REVERB button to access the EFFECT ROUTING page, where you
can set the effect to which each timbre and the mic audio is sent.
•
Use the Effect Type parameter (knob 1) to select the effect type. The parameters shown below (knobs 2–5)
depend on the effect type.
|

DELAY

1. Effect Type (Type) [Stereo, Ping Pong, Tape Echo, Pitch Shift, Reverse, LoRes]
Selects the effect type.
2...5. Effect Parameters
This configures the parameters of each effect.
For more on the parameters, refer to the explanations for each effect type.
|

DELAY EXTRA

1...5. Effect Parameters
Selects the effect type.
|

Effect Type

Stereo
Independently delays the left and right channels
Ping Pong
A delay that alternates between left and right channels.
DELAY
→ EFFECT ROUTING
105