Connections & Indicators; Installation Tips - Intellinet 560542 Quick Install Manual

PoE Web-Managed Desktop Gigabit Switch
Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
Managed Desktop Gigabit Switch, Model 560542.
CONNECTIONS & INDICATORS
LEDs
The LED indicators — Power,
PoE, Link/Activity — make it
easier to monitor the switch
and its connections.
Ports
All ports on the switch
support Auto-MDI/MDI-X
functionality, so crossover cables and uplink ports are not needed for connections
to PCs, routers, hubs, other switches, etc. Cat5/5e/6 UTP/STP cables provide
optimal performance; if a status LED doesn't indicate a link or activity, check the
corresponding device for proper setup and operation. NOTE: The recessed Reset
button can be pressed (using a pin or similar pointed object) to reset the switch if
it isn't responding.
Power
Use the included power cord to connect the device (next to
the On/Off switch on the rear panel) to an AC outlet. Confirm
that the power LED on the front panel is lit.

INSTALLATION TIPS

Prior to use, it is recommended that the switch be placed/positioned:
• on a level surface with at least 25 mm (approx. 1") of clearance for ventilation;
• away from sources of electrical noise: radios, transmitters, broadband amplifiers,
etc.
2
ENGLISH
LED Status
Power On
Off
PoE On
Off
Link/Act On
Blinking
Off
8-Port PoE+ Web-
™
Operation
Power on
Check the AC connection; turn the power on
Port is linked to a PSE/PoE device
No PSE/PoE device is linked
Valid port connection
Valid port connection; data transmitted/received
No link established
English
ON
OFF