Pabx Access Code; Base Settings; Base Ringtone; Base Ringer Volume - Motorola D811 User Manual

D811_IFU_EN.fm Page 12 Friday, September 7, 2007 8:01 PM
Back
5. Press
to return to the previous menu level or
>
to standby.

PABX access code

If your D801 is connected to a switchboard, you may need to
enter a
one-digit access code in the dialling sequence to be able to
connect to the outside line.
The access code will be displayed at the beginning of a number
on the screen.
The access code will not be used when you dial the number
yourself (rather than for example from the phonebook). This
allows you to make calls to other switchboard extensions.
Menu Settings Select
1. Press
, scroll to and press .
d
Set Handset Select
2.
is highlighted. Press .
PABX Access Code Select
3. Scroll
to and press .
d
On Off Set Code Select
4. Scroll
or to , or then press
u d
Set Code
If you select , enter the switchboard access code
Save
e.g. 9 then press .
Back
5. Press
to return to the previous menu level or
>
to standby.
12
to return

5. Base settings

Base ringtone

Select from 5 base ringtones.
You will hear a sample ring for each one you highlight.
Menu Settings
1. Press
, scroll to and press
d
Set Base Select
2. Scroll
to and press .
d
Ringtone Select
3.
is highlighted. Press .
4. Scroll
or highlight the ringtone you want.
u d
Select
5. Press
to confirm.
Back
6. Press
to return to the previous menu level or
to standby.

Base ringer volume

The base has 5 ringer volume settings plus Off.
Menu Settings
1. Press
, scroll to and press
d
.
Set Base Select
2. Scroll
to and press .
d
Ringer Volume Select
3. Scroll
to and press
d
4. Press
or to display the volume level you want. Press
u d
to return
Select
to confirm.
Back
5. Press
to return to the previous menu level or
to standby.

Dialling mode

Your D801 is pre-set to Tone dialling. You should not normally need
to change this setting. The dial mode options are Tone or Pulse.
Menu Settings
1. Press
, scroll to and press
d
Set Base Select
2. Scroll
to and press .
d
Dialling Mode Select
3. Scroll
to and press
d
Pulse Tone
4. Press
or to highlight or
u d
confirm.
Back
5. Press
to return to the previous menu level or
to standby.

Ring priority

When you have more than one handset registered to your
base, you can set one handset to ring before the other
handsets. This allows one handset user to answer all incoming
first, like a receptionist.
All Handsets
Choose if you want all handsets to ring at the same
Select Handset
time or to nominate a handset to ring two times
before the others.
Menu Settings
1. Press
, scroll to and press
d
Set Base Select
2. Scroll
to and press .
d
Ring Priority Select
3. Scroll
to and press
d
4. Press
or to highlight
u d
Select
press .
Select Handset
If you choose
displayed. Scroll or
u d
Select
then press .
Scroll or to the number of rings you want to set 2, 4
Select
. u d
Select
or 6 and press .
Back
5. Press
to return to the previous menu level or
to standby.

Recall mode

to return
> Menu Settings
1. Press
, scroll to
d
Set Base
2. Scroll
to and press
d
Recall Mode
3. Scroll
to and press
d
4. Press
or to highlight
u d
confirm.
Select
.
Back
5. Press
to return to the previous menu level or
to standby.
.

First ring

If you have subscribed to your network's Caller Display service, your
to return
D801801 does not ring until the caller information has been
>
received and displayed.
However, if you want your handset to ring without waiting for
the caller information to be displayed, set First Ring to On.
Please note that this will mean the first ring you hear will be the
default ringtone. This will change to any ringtone you have set
Select
.
once the caller information is displayed.
Menu Settings
1. Press
, scroll to
.
d
Set Base
2. Scroll
Select to and press
then press to
d
First Ring
3. Scroll
to and press
d
On Off
4. Press
or to or
to return
u d
> Back
5. Press
to return to the previous menu level or
to standby.

System PIN

The System PIN is used when changing certain settings and
registration / de-registration. The default setting is 0000. You
can change this to your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as ****.
Menu Settings
1. Press
, scroll to
d
Set Base
2. Scroll
to and press
d
Select System PIN
3. Scroll
. to and press
d
4. Enter the old PIN (original setting 0000) and press
5. Enter the new PIN and press
.
All Handsets Select Handset
or then
all available handsets are
to highlight the handset you want
to return
>
Select
and press .
Select
.
Select
.
Recall 1 Recall 2 Select
or then press to
to return
>
Select
and press .
Select
.
Select
.
Select
then press to confirm.
to return
>
Select
and press .
Select
.
Select
.
OK
.
OK
.
Base settings