Product Disposal Instructions; Warranty Information; Declaration Of Conformance; Inserting A Pause - Motorola D811 User Manual

D811_IFU_EN.fm Page 21 Friday, September 7, 2007 8:01 PM
• Do not stand your product on carpets or other surfaces
which generate fibres, or place it in locations preventing the
free flow of air over its surfaces.
• Do not submerge any part of your product in water and do
not use it in damp or humid conditions, such as bathrooms.
• Do not expose your product to fire, explosive or other
hazardous conditions.
• There is a slight chance your phone could be damaged by
an electrical storm. We recommend that you unplug the
power and telephone line cord during an electrical storm.

Product disposal instructions

The symbol shown here and on the product means
that the product is classed as Electrical or
Electronic Equipment and should not be disposed
with other household or commercial waste at the
end of its working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place to
recycle products using best available recovery and recycling
techniques to minimize the impact on the environment, treat
any hazardous substances and avoid the increasing landfill.
Product disposal instructions for
residential users
When you have no further use for it, please remove any
batteries and dispose of them and the product per your local
authority's recycling processes. For more information please
contact your local authority or the retailer where the product
was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check the
terms and conditions of the purchase contract and ensure that
this product is not mixed with other commercial waste for
disposal.

Warranty Information

The authorized Motorola dealer or retailer where you
purchased your Motorola product will honour a warranty claim
and/or provide warranty service.
Please return your radio to your dealer or retailer to claim your
warranty service. Do not return your telephone to Motorola. In
order to be eligible to receive warranty service, you must
present your receipt of purchase or a comparable substitute
proof of purchase bearing the date of purchase. The telephone
should also clearly display the serial number. The warranty will
General information
not apply if the type or serial numbers on the product have been
altered, deleted, removed, or made illegible.
What Is Not Covered By The Warranty
• Defects or damage resulting from use of the Product in other
than its normal and customary manner or by not following
the instructions in this user manual.
• Defects or damage from misuse, accident or neglect.
• Defects of damage from improper testing, operation,
maintenance, adjustment, or any alteration or modification of
any kind.
• Breakage or damage to aerials unless caused directly by
defects in material or workmanship.
• Products disassembled or repaired in such a manner as to
adversely affect performance or prevent adequate
inspection and testing to verify any warranty claim.
• Defects or damage due to range.
• Defects or damage due to moisture, liquid or spills.
• All plastic surfaces and all other externally exposed parts
that are scratched or damaged due to normal use.
• Products rented on a temporary basis.
• Periodic maintenance and repair or replacement of parts
due to normal usage, wear and tear.
Technical Information
How many telephones can I have?
All items of telephone equipment have a Ringer Equivalence
Number (REN), which is used to calculate the number of items
which may be connected to any one telephone line. Your D801
has a REN of 1. A total REN of 4 is allowed. If the total REN of
4 is exceeded, the telephones may not ring. With different
telephone types there is no guarantee of ringing, even when the
REN is less than 4.
Any additional handsets and chargers that you register have a
REN of 0.

Declaration of Conformance

Hereby, Motorola declares that this D801 is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC.
The Declaration of Conformance for the D801 is published on
the website: http://www.motorola.com/eu/radios/
technicaldocumentation

Inserting a pause

With some switchboards, after dialling the access code you
may have to wait for a moment while the switchboard picks up
an outside line so you will need to enter a pause in the dialing
sequence.
Press and hold to insert a pause (P) before entering the
u
telephone number.
You may also need to enter a pause when storing international
numbers or charge card numbers.

Recall

You may need to use the recall function if you are connected to
a switchboard/PBX (Private Branch Exchange), contact your
PBX supplier for further information.
21