Key Beep; Pabx Access Code; Base Settings; Base Ringtone - Motorola D1101 User Manual

Key beep

When you press a button on the D1100 handset you hear a
beep. You can switch this on or off.
d
Menu Settings Select
1. Press , scroll to and press
Set Handset Select
2. is highlighted. Press .
d
Key Beep Select
3. Scroll to and press .
u d
Off On Select
4. Scroll or to or then press .
Back
5. Press to return to the previous menu level or
to standby.

PABX access code

If your D1100 is connected to a switchboard, you may need to
enter a one-digit access code in the dialling sequence to be
able to connect to the outside line.
The access code will be displayed at the beginning of a number
on the screen.
The access code will not be used when you dial the number
yourself (rather than for example from the phonebook). This
allows you to make calls to other switchboard extensions.
d
Menu Settings Select
1. Press , scroll to and press
Set Handset Select
2. is highlighted. Press .
d
PABX Access Code Select
3. Scroll to and press .
u d
On Off Set Code
4. Scroll or to , or then press
Set Code
If you select , enter the switchboard access code
Save
e.g. 9 then press .
Back
5. Press to return to the previous menu level or
to standby.
12

5. Base settings

Base ringtone

Select from 5 base ringtones.
.
You will hear a sample ring for each one you highlight.
d
Menu Settings
1. Press , scroll to
d
Set Base
> 2. Scroll to and press
to return
Ringtone
3. is highlighted. Press
u d
4. Scroll or highlight the ringtone you want.
Select
5. Press to confirm.
Back
6. Press to return to the previous menu level or
to standby.

Base ringer volume

The base has 5 ringer volume settings plus Off.
d
Menu Settings
1. Press , scroll to
d
Set Base
2. Scroll to and press
d
Ringer Volume
3. Scroll to and press
u d
4. Press or to display the volume level you want. Press
Select
. to confirm.
Back
5. Press to return to the previous menu level or
to standby.
Select
.

Dialling mode

Your D1100 is pre-set to Tone dialling. You should not normally need
>
to change this setting. The dial mode options are Tone or Pulse.
to return
d
Menu Settings
1. Press , scroll to
d
Set Base
2. Scroll to and press
d
Dialling Mode
3. Scroll to and press
u d
4. Press or to highlight
confirm.
Back
5. Press to return to the previous menu level or
to standby.

Ring priority

When you have more than one handset registered to your
base, you can set one handset to ring before the other
handsets. This allows one handset user to answer all incoming
first, like a receptionist.
Choose
Select
and press .
Select Handset
time or
Select
.
before the others.
Select
.
1. Press
2. Scroll
3. Scroll
>
to return
4. Press
Select
.
If you choose
displayed. Scroll
Select then press
and press .
Select
.
Scroll
Select
.
6 and press
5. Press
to standby.
>
to return

Recall mode

1. Press
2. Scroll
3. Scroll
4. Press
Select
and press . confirm.
Select
. 5. Press
Select
. to standby.
Pulse Tone Select
or then press to

First ring

>
If you have subscribed to your network's Caller Display service, your
to return
D1100 does not ring until the caller information has been received
and displayed.
However, if you want your handset to ring without waiting for
the caller information to be displayed, set First Ring to On.
Please note that this will mean the first ring you hear will be the
default ringtone. This will change to any ringtone you have set
once the caller information is displayed.
1. Press
2. Scroll
3. Scroll
4. Press
5. Press
to standby.
EN
All Handsets
if you want all handsets to ring at the same
to nominate a handset to ring two times
d
Menu Settings Select
, scroll to and press .
d
Set Base Select
to and press .
d
Ring Priority Select
to and press .
u d
All Handsets Select Handset
or to highlight or then press
Select Handset
all available handsets are
u d
or to highlight the handset you want
Select
.
u d
or to the number of rings you want to set 2, 4 or
Select
.
>
Back
to return to the previous menu level or to return
d
Menu Settings Select
, scroll to and press .
d
Set Base Select
to and press .
d
Recall Mode Select
to and press .
u d
Recall 1 Recall 2 Select
or to highlight or then press
>
Back
to return to the previous menu level or to return
d
Menu Settings Select
, scroll to and press .
d
Set Base Select
to and press .
d
First Ring Select
to and press .
u d
On Off Select
or to or then press to confirm.
>
Back
to return to the previous menu level or to return
Base settings
to