8.11
To set PBX Access Code
If the phone is connected to a switchboard, you may need to enter an PBX Access Code in
the dialling sequence to be able to connect to the outside line.
The PBX Access Code will be displayed at the beginning of a number on the screen. The
code can be up to 4 digits long.
The PBX Access Code will not be used when you dial the number manually (such as
when you are not dialling from the phonebook). This allows you to make calls to other
switchboard extensions.
1. Press Menu, scroll
2.
Set Handset
is highlighted. Press Select.
D
3. Scroll
to
PBX Access Code
U
D
4. Scroll
or
to Off,
If you select
Set
Code, enter the switchboard access code e.g. 9 then press Save.
n
5. Press
to return to standby mode.
34
D
to
Settings
and press Select.
and press Select.
On
or
Set Code
then press Select.
Handset setting