Table of Contents
Advertisement
Building in the appliance under a
worktop
DO013
1.
The dimensions of the recessed installation area
must correspond with those indicated in the figure.
1xB
1xA
2
2
1
2. Installation kit
Left hand
bracket
3. Position the two brackets as shown in the figure.
2xC
12
1
2
1
Right hand
bracket
1
2
4. Push the appliance into place. The plug socket
necessary for connection of the appliance to the
electricity supply should be positioned, so that the
plug is not placed in the recess.
-
+
Li89
5.
To adjust the height proceed as follows:
- Loosen or tighten the two front feet.
- The rear feet are adjusted by turning the screw in
the front kick plate to the left or right.
27
2
Advertisement
Table of Contents
