Installation; Power Supply - JUNO JKU 6435, JKU 6035 Operating Instructions Manual

Installation

See installation instructions supplied.
Please check whether, after installing your appliance and espe-
cially after rehingeing the door, the door seal seals right round.
An untight door seal may lead to heavy frosting and thereby to a
higher power consumption (see also „What to do if...").

Power supply

A correctly installed, earthed socket is required for the electrical
supply. The supply must have a fuse rating of at least 10 Amps.
If the socket is not accessible once the appliance is built in, the
electrical installation must include suitable means of isolating the
appliance from the mains (e.g. fuse, cut-out, current trip or simi-
lar with a minimum contact separation of 3 mm).
0 Before initial start-up, refer to the appliance serial plate to ascer-
tain if supply voltage and current values correspond with those
of the mains at the installation location.
e.g.:
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
The mains cable may only be changed by a qualified electrician.
If your appliance needs repairing, please contact our Customer
Service.
36
AC 220 ... 240 V 50 Hz or
220 ... 240 V ~50 Hz