Page 2
03-06 Items required to complete: 06-11 • Metric 1.5mm, 2.0mm hex tools Front Upper Turnbuckle Assembly • Metric 5.5mm, 7.0mm 8.0mm Nut Driver Turnbuckle Assembly-Steering Rod • 2 Channel Surface Radio System (Minimum) Front Spindle[Left Side] • 1/10 ESC, Motor & Pinion Gear Front Spindle(Right Side) Rear Hud&Cva •...
Page 3
Screw Cement Round Cutter & Sander Grease Needle Nose Pliers Sharp Hobby Knife Ware Cutters For trimming bodies Cutting along curved lines was never so easy! Cross Wrench Silicone Shock Oil SP Knife Edge Reamer Hex Wrench 1.5mm Do not pre-drill as precise drilling of 1mm to 15mm holes can be performed after 2.0mm...
Page 4
Chassis Guard Installation Chassis Brace Installation M3X6mm Flat Head Hex Screw M3X8mm Flat Head Hex Screw 99400076 選用短型電池的玩家,請將厚度1-3mm的海綿 貼至左右側板,以達到保護電池的緩衝與固定。 The player who chooses shorty battery, please paste the foam to left and right mud guard (The thickness is 1mm.) to protect battery and let it be buffering and firm. 76500066 M3X6mm 82400016...
Page 9
PR S1 V3(FM) Front Suspension(L&R) Front Shock Stay M2.6X4mm Button Head Hex Screw 2.6X4mm(5.5mm ) 80400016 M3mmX29.8mm 66430100 1.80mm 65400016 Front Shock Stay 76500036-3mm M3X8mm Button Head Hex Screw M3X8mm Flat Head Hex Screw (25°) 67400106 M3X14mm Flat Head Hex Screw M4.8X8mm 83400026 68430046...
Page 10
Front Upper Turnbuckle Assembly 36mm Turnbuckle Rods 66400346 (36mm) 66400066 One side is reverse threaded. 16.90 28.20 28.20 Turnbuckle Assembly-Steering Rod 36mm Turnbuckle Rods 66400066 66400346 (36mm) One side is reverse threaded. 19.10 mm 19.10 mm 31.30 mm 31.30 mm 31.30 mm 31.30 mm Part Bags used.
Page 17
PR S1 V3(FM) Rear Grar Box M3X8mm Button Head Hex Screw M3X8mm 80400036 M3X8mm Flat Head Hex Screw 71400036 M3X8mm 82400026 Rear Suspension. 36mm Turnbuckle Rods 66400066 66400346 (36mm) One side reverse threaded. 16 mm 16 mm 31.30 mm 28.20 mm 28.20 mm 31.30 mm Assemble in the...
Shock Assembly Front Shocks x2 Rear Shocks x2 83400066 1.6X2 CORRECT 85440070 INCORRECT Front-77410016 44mm EXTREMELY Rear-77410026 IMPORTANT 51mm Do not push the shock rod INCORRECT straight through the lower shock body assembly; O-ring damage may 66400066 result. Front-66430010 35.5mm Rear-66430030 40.5mm 21.5mm...
Page 19
PR S1 V3(FM) Front Suspension M3X25mm Button Head Hex Screw 68410066 68410066 M3X20mm Button Head Hex Screw 69440010 Before using the plastic nut, drive the screw M3 Nut 83480016 in and out a couple times before securing the nut onto the shock seat. M3X18mm 80400196 M3X25mm...
Page 20
Motor M3X6&8mm Button Hwad Hex Screw Must be purchased separately. Shim-3X8mm M3X8mm 80400036 M3X6mm 80400026 3X8mm Must be purchased separately. BATTERY Plate M3X8mm Flat Head Hex Screw M3X12mm 80400156 M3X16mm Button Head Hex Screw 91400016 M3X12mm 82400046 M3X14mm Flat Head Screws M3X16mm 80400216 Racers Tip:...
Page 21
PR S1 V3(FM) Tires. Antenna Tube M4 Lock Nut 68400316 83400036 68400296 83400036 Ensure smooth non-binding Part Bags used. movement while assembling.
Page 22
Body&Wheels Mounting Tires Wheel Installation 68400296 68400316 Rear Wheel Front Wheel (Sold sepsrstely) Pull the sidewall of the tire slightly away Place the tire insert into the tire form the rimand apply CA(Cyanoacrylate) and tire onto the weel. glue in between the tire bead and rim . Tire and insert (Sold sepsrstely) CA(Cyanoacrylate) glue sold separately.
Need help?
Do you have a question about the PRS1V3(FM) and is the answer not in the manual?
Questions and answers