Description Of Your Appliance - Fagor FA-375 Instructions For Use Manual

INSTALLATION
1 /

DESCRIPTION OF YOUR APPLIANCE

(depending on the model)
A
E
E
C
E E
A
Thermostat
B
Door shelves
C
Vegetable compartment
D
Bottle shelf
E
Freezer
B B
D
D
compartment
IREVERSING THE DIRECTION THE DOORS
OPEN
You can alter the direction in which the doors open if you wish:
The appliance must always be disconnected from the power
supply when changing the direction the doors open.
•Unscrew and take off the top cover.
•Take off the upper hinge by removing the 3 screws and then
remove the upper door.
•Release the hinge from the door by removing the door hole cover
•Unscrew the middle hinge and remove the lower door
•Take off the front hole covers and fix them on the previous location
of the middle hinge
•Swap over the lower hinge (foot included) and the opposite foot
•Unscrew the metal door stop located on the bottom of the lower
door and screw it properly on the opposite side.
•Adjust the lower door on the hinge pin and fit the middle hinge to
finish the assembling of this door
•Put the upper door on the middle hinge pin
•Screw the upper hinge after having adjusted the door on it
•Assemble and screw the top cover to finish the handling
•If your appliance is fitted with vertical handles, remember to move
them to the opposite side.
F
ITTING THE DOOR HANDLES
(depending on the model)
The handles are located inside the refrigerator. Fit the handles on
the doors, positioning them opposite the respective holes and fas-
ten them with the screws provided as shown in the diagram below.
Once the handles are in place, insert the screw covers supplied in
the spaces provided for this purpose
05
EN