Electrical Connection; Environmental Protection; Recycling - Fagor FA-375 Instructions For Use Manual

EN INSTALLATION
1 /
INST
Important:
Before installing your appliance please carefully read the safety ins-
tructions in order to avoid some minor inconveniences.
Install the appliance in a dry, well-ventilated room, away from any
heat source. Leave a minimum distance of 10cm between the top of
your appliance and any unit above it. If your installation does not
permit this, leave 5cm between the top of the casing and any kit-
chen unit fixed to the wall and a gap of 2.5cm on each side of the
appliance.
If your appliance must be installed next to another refrigerator or
freezer, do not attach the two appliances together to avoid conden-
sation forming on the outside.
Your appliance's climate class is shown on the identification plate.
It determines the ambient temperature range for which the refrige-
ration unit has been designed to ensure that the appliance will ope-
rate correctly.
Climate class
N
ST
T

ELECTRICAL CONNECTION

Socket characteristics: 220-240V with Earth.
Do not use extension leads or adaptors.
The cable must not be in contact with the compressor.
Do not trap the cable under the appliance.
The appliance's electrical installation s provided with an Earth. For
your safety's sake, connect the appliance to a socket fitted with an
efficient Earth (in accordance with the prevailing electrical installa-
tion safety regulations).
The manufacturer declines any responsibility for any damage cau-
sed through lack of Earthing.
BEFORE CONNECTION
• Clean the inside of your appliance with warm water and bicarbo-
nate of soda. Rinse and dry thoroughly.
• Wait 2 hours before switching on to ensure that the oil in the com-
pressor has stabilized.
Ambient temperatures
16° to 32°
18° to 38°
18° to 43°

ENVIRONMENTAL PROTECTION

This appliance contains no refrigerant gases harmful to the ozone
layer in its refrigeration circuit and its insulation materials. It must
not be disposed of with normal urban waste and scrap metal in
order to avoid damage to the refrigeration circuit, particularly at the
rear of the appliance. Contact your local town hall for information on
the collection of this type of appliance.

RECYCLING

The packaging materials for your appliance are made from recycla-
ble materials. Participate in recycling them and thereby contributing
to protecting the environment by disposing of them in the municipal
containers provided for this purpose.
Your appliance also contains many recyclable materials. It is there-
fore marked with this logo to inform you that worn-out appliances
should not be mixed in with other waste. The recycling that your
manufacturer arranges can then be done in optimum conditions n
accordance with European Directive 2002/9/EEC regarding waste
electrical and electronic equipment. Please contact your local town
hall or your dealer for the worn-out appliances collection points nea-
rest to your home. We thank you for collaborating in protecting the
environment.
04