D-Link SECURICAM NETWORK DCS-5300 User Manual page 95

Using IP surveillance Software (continued)
Monitor Program (continued)
Alert Message
If you have checked the box for "Enable Motion Detect" or "Enable Digital Input"
on "Camera Configurations > Alert Settings" screen, the alert message will
show in the window shown above. Once the alert, caused by motion detection
or a digital input level changer, is triggered, the alert message will be shown in
this window. If there are more events than this window can display, a scroll bar
will appear.
The message format is described as follows:
"time"=>"alert type" #"channel number"("win1","win2","win3")
For example, the message "PM 02:41:00=>MO #1(0,1,1)" means that this is a
motion detection alert occurring at 02:41:00 PM in Motion Window 2 and Motion
Window 3, for camera #1. If the message "PM 02:41:56=>DI #1" is listed, that
means there is an alert triggered by the DI, for camera #1, at 02:41:56 PM .
95