D-Link SECURICAM NETWORK DCS-5300 User Manual page 101

Using IP surveillance Software (continued)
Scheduling (continued)
The layout of the scheduler is roughly divided into 4 parts:
Part 1
The first part of the scheduler is the video channel selection area.
It provides the IP addresses and location information of the
connected video channels for the user's reference. You can select
a video channel in this area and create a schedule for it.
Part 2
The second part is the Primary schedule settings. It consists of
the day time-line, week time-line, begin time selector, end
time selector, and event mode settings.
Part 3
The third part is the Secondary schedule, which consists of event
mode settings.
Part 4
The fourth part contains the operation buttons for the user to
manipulate the edited schedule of the selected video channel.
The scheduler can be closed from here.
The Functionalities of Configuration Components
The four main parts of the scheduler have been briefly described in the section
above. Parts 1-4 will be described in detail in the following section
Video channel
IP address
101
Location
.