D-Link SECURICAM NETWORK DCS-5300 User Manual page 77

Using IP surveillance Software (continued)
Monitor Program (continued)
The Admin Privilege
In the monitor tool system, the admin privilege has the right to access the DCS-
5300 Network Camera through this application software and change the local
settings as well. But the admin privilege is not the same as the admin privilege
as the internet camera. You can change the settings of each selected internet
camera in the remote site only if you have the admin privilege of the internet
camera.
If you have the admin privilege, you have the right to do the following items:
Run the configuration tool
Change the recording schedule
Change the local settings
Again, if you need to change the settings of the DCS-5300, you must have
the password of the admin user.
Camera Configurations
When you log in for the first time, you should configure this application software
to connect the DCS-5300 in "Configuration Menu > Camera Configurations",
shown in the figure below. You will need the admin (administrator) privilege in
order to run the configuration.
Once you click "Configuration Menu > Camera Configurations" for
setting each camera, all recording processes will be stopped with a warning
window popped up in advance to keep you informed.
77