D-Link SECURICAM NETWORK DCS-5300 User Manual page 64

Record Snapshots to your FTP server with
Motion Detection (continued)
3
1st FTP user name-
4
1st FTP password-
5
1st FTP remote folder-
6
Primary FTP passive
mode-
2nd FTP server-
2nd FTP user name-
2nd FTP password-
2nd FTP remote folder-
Secondary FTP passive
mode-
For detailed information about each setting, please refer to Configuration >
Advanced > Network in the section titled "Using the DCS-5300 With an Internet
Browser" (page 38). Click the apply button when finished.
Specify the user name to access the external FTP
server (ex. John Smith).
Specify the password to access the external FTP
server (ex. 12345).
Specify the destination folder in the external FTP
server (ex. snapshot).
Passive mode will allow access to an external
FTP server if your camera is behind a router
protected by a firewall.
Specify the Domain name or IP address of your
second external FTP server. This field is optional
if you have already filled in the information for the
first FTP server.
Specify the user name to access your backup
FTP server.
Specify the user password to your backup FTP
server.
Specify the destination folder on your external
backup FTP server.
Passive mode will allow access to a second
external FTP server if your camera is behind a
router protected by a firewall.
64