D-Link SECURICAM NETWORK DCS-5300 User Manual page 49

Using the DCS-5300 with an Internet browser
(continued)
Configuration > Advanced > Image Setting (continued)
Click the video button from the Configuration screen to access video settings
that affect how the video image appears.
From this screen you can fine tune the video image.
Image Brightness, Contrast, Saturation and Hue are all adjusted in the same
manner. For each video compensation you can set from among eleven levels
ranged from -5 to +5.
You may press
will have on the image. When the image is acceptable, press
image settings, or
without saving, they will be used until the next system start-up.
Configuration > Advanced > Motion Detection
Click the Motion Detection button from the Configuration screen to
access settings that effect how the DCS-5300 Internet Camera can serve as
a security device by recording only when motion is detected.
Click Motion Detection
to fine-tune the image and see what effect the setting
to recall the original settings. If settings are changed
49
to store the