D-Link SECURICAM NETWORK DCS-5300 User Manual page 52

Using the DCS-5300 with an Internet browser
(continued)
Configuration > Advanced >Camera Control (Continued)
Enable IR Control -
Current Position -
Preset Position -
Dwelling Time -
Patrol Selection -
Click Apply to make
changes effective
Click this to allow the DCS-5300 to be controlled by
the included remote.
Enter a name for the position at which you would
like to preset the DCS-5300. Click Add to add the
new preset position to the Preset Locations list.
Using the pull down menu, you can delete a preset
position by selecting it and clicking Delete.
Set the value of time that the camera will remain on
each preset position before moving to the next. The
dwelling time can be set between 1 and 255
seconds.
To use the Auto Patrol feature, select the desired
preset positions from the Preset Locations list and
add them to the Selected Locations list by clicking
. You can then select the order in which the
Select
camera will patrol through the preset locations
by selecting a location and clicking UP or DN.
Click Remove to remove a location from the list.
52