Door Handle Adjustment - Cast Tec Solid Fuel Integra Installation And Operating Instructions Manual

Door handle adjustment

The door handle has a sophisticated adjustment system. It comprises of only 4 parts and
can be adjusted very simply by the end user. The system allows adjustment without the
need for spanners or other tools. The stove is provided with a set screw to perform this
function. Please keep this safe.
The door rope over time will flatten and the door seal will start to let air into the stove. This
will allow unwanted air into the combustion box and increase the speed of the burn. This
will affect the controllability of the stove.
Using the supplied Allen key, insert it into the hole in the side of door containing the set
screw. Turning it anti-clockwise, slacken the set screw until the door handle becomes
loose. Once loose, turn the handle the correct way as the drawing below. On completion,
slowly re-tighten the set screw until the handle is set.
Insert Allen key
5
Solid Fuel Inset's instructions Cast Tec Ltd