Cast Tec Solid Fuel Integra Installation And Operating Instructions Manual page 5

Very Important: The stove door should never be opened when the stove
is being fired vigorously.
! Wood and solid fuels, Re-fuelling when fire bed is low:
o If there is insufficient burning material in the fire bed to light a new
fuel charge, excessive smoke emission can occur. Refueling must
be carried out onto a sufficient quantity of glowing embers and
ash so that the new fuel charge will ignite fairly quickly. If there
are too few embers in the fire bed try adding some suitable wood
kindling so as to prevent excessive smoke.
! Fuel overloading:
o Do not overload the fuel inside the stove or exceed any guidelines
mentioned in these instructions as this can cause excess smoke.
! Door left open:
o Do not operate the stove with the door left open except for the
guidelines mentioned in these instructions as this can cause
excess smoke.
! Air Controls left fully open:
o Do not operate the stove with the continually with the controls fully
open except for the guidelines mentioned in these instructions as
this can cause excess smoke and result in inefficient combustion.
Solid Fuel Inset's instructions
4
Cast Tec Ltd