Winter Sports; Viewing Your Ski Runs; Recording A Backcountry Skiing Or Snowboarding Activity; Cross-Country Skiing Power Data - Garmin FENIX E Owner's Manual

13 Press .
14 Select Save.

Winter Sports

Viewing Your Ski Runs

Your watch records the details of each downhill skiing or snowboarding run using the auto run feature. This
feature is turned on by default for downhill skiing and snowboarding. It automatically records new ski runs when
you start moving down hill.
1 Start a skiing or snowboarding activity.
2 Hold .
3 Select View Runs.
4 Press and to view details of your last run, your current run, and your total runs.
The run screens include time, distance traveled, maximum speed, average speed, and total descent.

Recording a Backcountry Skiing or Snowboarding Activity

The backcountry skiing or snowboarding activity lets you switch between climbing and descending tracking
modes so you can accurately track your statistics. You can customize the Mode Tracking setting to
automatically or manually switch tracking modes
1 From the watch face, press
2 Select an option:
• Select Activities > Winter Sports > Backcountry Ski.
• Select Activities > Winter Sports > Backcountry Snowboard.
3 Select an option:
• If you are starting your activity on a climb, select Climbing.
• If you are starting your activity moving downhill, select Descending.
4 Press to start the activity timer.
5 If necessary, press
6 After you complete your activity, press

Cross-Country Skiing Power Data

NOTE: The HRM-Pro series accessory must be paired to the fēnix watch using ANT+ technology.
You can use your compatible fēnix watch paired with the HRM-Pro series accessory to provide real-time
feedback about your cross-country skiing performance. The power output is measured in watts. Factors that
affect power include your speed, elevation changes, wind, and snow conditions. You can use power output to
measure and improve your skiing performance.
NOTE: Skiing power values are generally lower than cycling power values. This is normal and occurs because
humans are less efficient at skiing than they are at cycling. It is common for ski power values to be 30 to 40
percent lower than cycling power values at the same training intensity.
40
(Activity Settings,
.
to switch between climbing and descending tracking modes.
, and select Save.
page 45).
Apps and Activities