Anchor Settings; Skiing And Winter Sports; Viewing Your Ski Runs; Recording A Backcountry Skiing Or Snowboarding Activity - Garmin MARQ ATHLETE Owner's Manual

Anchor Settings

From the watch face, press START, select Anchor, hold MENU, and select the activity settings.
Drift Radius: Sets the allowable drift distance while anchored.
Update Interval: Sets the time interval for updating anchor data.
Anchor Alarm: Allows you to enable or disable an alarm for when the boat moves beyond the drift radius.
Anchor Alarm Duration: Allows you to set the anchor alarm duration. When the anchor alarm is enabled, an alert
appears each time the boat moves beyond the drift radius during the specified alarm duration.

Skiing and Winter Sports

You can add skiing and snowboarding activities to your activity list
You can customize the data screens for each activity

Viewing Your Ski Runs

Your watch records the details of each downhill skiing or snowboarding run using the auto run feature. This
feature is turned on by default for downhill skiing and snowboarding. It automatically records new ski runs
based on your movement. The activity timer pauses when you stop moving downhill and when you are on a
chairlift. The activity timer remains paused during the chairlift ride. You can start moving downhill to restart the
activity timer. You can view run details from the paused screen or while the activity timer is running.
1 Start a skiing or snowboarding activity.
2 Hold MENU.
3 Select View Runs.
4 Press UP and DOWN to view details of your last run, your current run, and your total runs.
The run screens include time, distance traveled, maximum speed, average speed, and total descent.

Recording a Backcountry Skiing or Snowboarding Activity

The backcountry skiing or snowboarding activity lets you switch between climbing and descending tracking
modes so you can accurately track your statistics. You can customize the Mode Tracking setting to
automatically or manually switch tracking modes
1 From the watch face, press START.
2 Select Backcountry Ski or Backcountry Snowboard.
3 Select an option:
• If you are starting your activity on a climb, select Climbing.
• If you are starting your activity moving downhill, select Descending.
4 Press START to start the activity timer.
5 If necessary, press LAP to switch between climbing and descending tracking modes.
6 After you complete your activity, press STOP, and select Save.

Cross-Country Skiing Power Data

NOTE: The HRM-Pro series accessory must be paired to the MARQ watch using ANT+ technology.
You can use your compatible MARQ watch paired with the HRM-Pro series accessory to provide real-time
feedback about your cross-country skiing performance. The power output is measured in watts. Factors that
affect power include your speed, elevation changes, wind, and snow conditions. You can use power output to
measure and improve your skiing performance.
NOTE: Skiing power values are generally lower than cycling power values. This is normal and occurs because
humans are less efficient at skiing than they are at cycling. It is common for ski power values to be 30 to 40
percent lower than cycling power values at the same training intensity.
Activities and Apps
(Customizing Activities and Apps,
(Customizing the Data Screens,
(Activities and App Settings,
page 30).
page 31).
page 32).
19