Setting Time Alerts; Setting A Storm Alert; Turning On Phone Connection Alerts; Sound And Vibration Settings - Garmin FENIX E Owner's Manual

Setting Time Alerts

1 From the watch face, hold
2 Select Watch Settings > Notifications & Alerts > System Alerts > Time.
3 Select an option:
• To set an alert to sound a specific number of minutes or hours before the actual sunset occurs, select Til
Sunset > Status > On, select Time, and enter the time.
• To set an alert to sound a specific number of minutes or hours before the actual sunrise occurs, select Til
Sunrise > Status > On, select Time, and enter the time.
• To set an alert to sound every hour, select Hourly > On.

Setting a Storm Alert

This alert is an informational feature and is not intended to be the primary source for tracking changes
in the weather. It is your responsibility to review weather reports and conditions, to remain aware of your
surroundings, and to use safe judgment, especially during times of severe weather. Failure to heed this warning
could result in serious personal injury or death.
1 From the watch face, hold
2 Select Watch Settings > Notifications & Alerts > System Alerts > Barometer > Storm Alert.
3 Select an option:
• Select Status to turn the alert on or off.
• Select Rate to update the rate of barometric pressure change that triggers a storm alert.

Turning On Phone Connection Alerts

You can set your watch to alert you when your paired phone connects and disconnects using Bluetooth
technology.
1 From the watch face, hold
2 Select Watch Settings > Notifications & Alerts > System Alerts > Phone.
From the watch face, hold
Button Tones: Plays a tone when you press a button.
Vibration: Sets watch vibrations for alerts and button presses.

Sound and Vibration Settings

.
WARNING
.
.
Sound and Vibration Settings
, and select Watch Settings > Sound & Vibe.
81