Option 2: Using Asus Geforce Rtx 4080 Tuf Gaming - EK-Quantum Vector2 EVO Strix-TUF RTX 4080 ABP Set User Manual

Gpu water block

Hide thumbs Also See for Vector2 EVO Strix-TUF RTX 4080 ABP Set:

Table of Contents

M2.5 x 4 AX1 SCREW

M2.5 PVC WASHER

M2.5 x 6 AX1 SCREW

I/O BRACKET SCREW

Screws must be present in the places marked on the picture.

STEP 2

OPTION 2: USING ASUS GEFORCE RTX 4080 TUF GAMING

Use eight (8) M2.5 x 4 AX1 screws and PVC washers to tighten

the GPU PCB. An additional one (1) M2.5 x 6 AX1 Screw must be

secured with an M2.5 Nut. Tighten the screws evenly using the

Phillips-head screwdriver. EK recommends you start tightening

the screws around the GPU core first and then continuing outward

to prevent damaging the GPU. Always use a plastic washer under

each screw.

After attaching the water block, three (3) saved Factory provided

I/O Bracket screws can be reused.

M2.5 NUT

STEP 2

- 15 -

Table of Contents

Do you have a question about the Vector2 EVO Strix-TUF RTX 4080 ABP Set and is the answer not in the manual?