Applying Thermal Compound - EK-Quantum Vector2 EVO Strix-TUF RTX 4080 ABP Set User Manual

104x6x2 mm
8x6x2 mm
104x6x2 mm

APPLYING THERMAL COMPOUND

STEP 4
Use two (2) Thermal Pad- VRM – (120x6x2 mm)
8x6x2 mm
From each of them cut two (2) pieces of length 8 mm.
Thermal Pad - VRM – (120x6x2 mm)
STEP 4
STEP 1
Apply the enclosed thermal grease (thermal compound) on the GPU
heat spreader – IHS – as shown in the image. The layer of the thermal
compound must be thin and even over the entire surface of the IHS.
For this step, you will need:
Thermal Grease
STEP 1
- 13 -
120 mm
2 mm
The excessive or uneven application of thermal grease
may lead to poor performance!