EK-Quantum Vector2 EVO Strix-TUF RTX 4080 ABP Set User Manual page 10

TERMINAL O-RING
14 x 1 mm
M3.5-M2.5x11.3 STANDOFF
ACTIVE BACKPLATE
STEP 2
M2.5-M3x6.6 STANDOFF
PCB
CARDBOARD
STEP 3
STEP 2
Carefully remove the complete active backplate with the terminal.
Additional two (2) O-rings 14 x 1 EPDM50 needs to be removed.
STEP 3
Unscrew six (6) M2.5-M3 x 6.6 standoffs with the provided
tool (EK-Plug out Spludger Tool). Make sure not to unscrew the
M3.5-M2.5 x 11.3 standoff! In case the M3.5-M2.5 x 11.3 standoff
unscrews, carefully tighten it back with the 4 mm wrench. After
removing the standoffs, the PCB cardboard needs to be removed.
Save the removed parts for later use.
For this step, you will need:
EK-Plug Out Spludger Tool
- 10 -