Next Level Racing Formula Lite Pro Instruction Manual page 23

Video Instruction: bit.ly/nlrbuild
WARNING
Do not use power tools for assembly as over tightening can damage the Frame.
Do not adjust the Hubs while sitting in Cockpit.
Make sure the Hubs are tightened fully before using the Cockpit. (Spin the Hub's Cam Levers clockwise to ensure
the Hubs are fully tight.)
Make sure the Wheel Plate Strap on the Wheel Plate Tube is tight when adjusting the Hubs, otherwise the Wheel
Plate Tube will fall when Hubs are open.
Moving parts present a pinch hazard. Take care when adjusting to avoid injury.
Keep the Velcro Straps away from the mesh seat to prevent pilling.
ASSISTANCE
ASSEMBLY
VIDEO
bit.ly/nlrbuild
If you require further support with your product please
contact our friendly team at: support@nextlevelracing.com
23