Wifi Set Up (Option) - Calspas Patio Plus Owner's Manual

Setting up The CalConnect Wifi Module Setting up The CalConnect Wifi Module
Access Your spa through a direct connection, local wifi, or
through the cloud to monitor you spa when you are away.
This guide will show you how to.
ANYWHERE. ANYPLACE.
1. A direct connection anywhere in the local proximity of
your tub.
Access your spa via
2. Anywhere in your house that you can connect tor you
1. a direct connection anywhere in the local proximity of
local WiFi network = (Local Connect)
your tub = (INITIAL SETUP)
3. With your smartphone, anywhere in the world with an
Internet connection
2. anywhere in your house that you can connect to your
local WiFi network = (LOCAL CONNECT)
3. anywhere in the World you have an internet connection to
your smart device via 3G, 4G or WiFi hot spots =
(CLOUD CONNECT)
BALBOA WATER GROUP
STARTUP
BALBOA WATER GROUP
BWA APP FOR IOS & ANDROID DEVICES
BWA APP FOR IOS & ANDROID DEVICES
Note: Ensure that both Bluetooth and Wifi are activated
on your phone. Failure to do so will cause paring issues.
bwa™ for Android™
1. Before starting, make sure that the
Before starting, ensure the wifi module
1.
WIFI module is connected to the
is connected to the BP control pack. Also
Balboa BP control box
flip your spa breaker off then back on
again to send the wifi module into dis-
covery mode.
2. Go to the WIFI settings of your
On your iPhone or Android device en-
2.
device.
sure that the wifi option is toggled active
to detect networks nearby. stay on this
discovery screen.
3. Identify the BWA network
BWGSpa_xxxxxx
Select the network with the name
3.
BWGSpa_xxxxxx (it will be a combination
of numbers and letters)
4. Connect to the BWA network
Once connected to the network you
4.
BWGSpa_xxxxxx
can proceed to the BWA App.
57
bwa™ for iOS®