Acer S5201M Series Service Manual page 46

3. Assembly HSG ILL Module:
3.1 CM Assembly
I. Insert "Clip CM Side" first, and then place "Clip Front CM" to fixed-shaft of ILL SUB
before locking screw (Fig. 3-1, Fig. 3-2).
II. Assemble Mylar SUB HSG ILL to HSG ILL and to make CM contact three datum on the
HSG ILL Well (Fig. 3-3).
III. Assemble "MYLAR CM" to the CMD firstly(Fig. 3-4), "CLIP TOP CM(with forceps) to
the "HSG IL" (Fig. 3-5).
IV. To check and make sure "CLIP of CM" hooks the HSG ILL very Well (Fig. 3-6).
V. Paste "Sponge tube AL" on cannelure of" HSG ILL" (Fig. 3-7).
6.2 FM Module Assembly
1. FM Module must be placed to fixed shaft and on the datum surface of "ILL SUB" and
then lock with screw well (Fig. 3-8).
Clip CM Side
Datum1
Fig. 3-1 Fig. 3-2
Fig. 3-3
46
Fixed shafts
of ILL SUB
Screw
Datum3
Datum2