Smart Pen Firmware Upgrade Sop - Acer S5201M Series Service Manual

SMART PEN Firmware Upgrade SOP

1. Serve a VGA input to projector
2. Enable PB function in user menu
3. Link pen to projector. Pen's Link LED (Blue) will blink once every 4 sec after link success.
4. Enter factory menu page 7
5. You will see AP/Pen firmware version. Pen version display only when it connects to
projector.
6. Select PB F/W Load Target to Pen
7. Select PB F/W Load Start and press Right button
8. LED Lamp red
35