Chapter 3 System Disassembling And Replacement; Main Unit Disassembling - Acer S5201M Series Service Manual

Chapter 3

Main Unit Disassembling

Tool : Screw Driver --Hex (#4-40) and Cross(Mechanical : M3,M4, Opt.Engine :M2)
Process :
Step Discription
(1) Disassemble the
screws*5(M3*L8) in the lower
case.
1 (2) Disassemble the
screws*2(M2.5*L10) in the inlet
and outlet case.
(3) Take off the lamp-door.
(1) Disassemble the screws*3
(M3*L6) connecting the U/C with
the machine(you may need to
disclose the film on the upper
2
case).
(2) Hit the inlet-case to loose the
hook and at the same time lift the
upper case.
(1) Untie the tie in the engine and
loose the wire in it(Figure1).
(2) Disassemble the
screw*1(M3*L8) connecting the
F/C with the L/C.(Figure2).
3 (3) Extract the IR 3pin wire in the
main board and take off the front
case. (Figure 3,4)
Attention : DON'T TOUCH OR
BREAK THE LEN.
System Disassembling and Replacement
S5201M Dismantle SOP
4
2
Hit the inlet case to
loose the hook
Figure1
Figure4
Notice: Please release
the IR wire before take
off the Front Case.
3
1
5
1
2
Hook in U/C
Figure2
38
3
at the same
time lift the
upper case
Figure3
Tool
screw
driver
Lamp door
screw
driver
IR 3pin Wire
screw
driver