Acer S5201M Series Service Manual page 6

2.6 Focus
2.6.1 区 Pattern
2.6.2 Defocus and Flare
2.6.3 Focus unbalance
2.7 Lateral Color
2.8 Image Quality
2.8.1 DMD Image Quality
2.8.2 Image Imperfection
2.9 Lamp Type
3.0 Mechanical Specification
3.1 Dimensions
3.2 Weight
3.3 Security Slot
3.5 Lens Cover
3.6 Feet
4.0 Packaging
4.1 Outside Dimensions
4.2 Weight
4.3 Transportation
5.0 Thermal Specification
5.1 Surface held or touched
for short periods
5.2 Surface which may be
touched
5.3 Exhaust Air
6.0 Environmental
6.1 Temperature
6.2 Humidity
6.3 Audible Noise Level
(1) If pattern can be uniformly focused (not worse than
Limit Sample), then pass!
(2) If it's difficult to judge, then check 2.6.2
Defocus: R<=3.0; G<=3.0; B<=3.0 pixel
Flare: R<=3.5; G<=3.5; B<=3.5 pixel
Slight flare is not counted as flare.
Adjust focus from near to far until one corner clear,
difference less than 50 cm
R-G
G-B
R-B
Philips UHP 210-160W 0.9 E20.9 AC Lamp
290 x98.5x 254 mm (W x H x D)
<3500g
Kensington compatible slot 36kgf break away force
Detached lens cover
Fast adjustable foot in front, Adjustable foot in rear.
Front/ Rear foot Tilt:0-6 ,Right/Left: ±2.2
Detail refer to Packing Description
375 x 216 x 370 mm (W x H x D)
<5.5 kg (Including Accessories, Projector)
30 EA by Air;
1500 EA @ 40' container, or750 EA @ 20' container by
Sea
Mechanical component temperature at ambience
0~35℃
Metal < 65°C; Plastic<85°C
Metal
<65°C
<95°C
Adhere to Appendix B
Operating
0~35°C, without condensation
Storage -30~65° C, without condensation
Operating 10~90%RH, without condensation
Storage 10~90%RH, without condensation
Normal mode: 36dBA @ 23±2° C, CW x2
speed
Eco mode: 31dBA @ 23±2° C, CW x2 speed
Typical
Normal mode: 38dBA @ 23±2° C, CW x3
speed
Eco mode: 33dBA @ 23±2° C, CW x3 speed
Normal mode: 38dBA @ 23±2° C, CW x2
Maximum
speed
6
Center of
49"diagonal area
<2/3
<2/3
<1
∘
Plastic
<85°C
All other area
<1
<1
<1
∘