3Com OfficeConnect 3C16771 User Manual page 136

136 A C: O
PPENDIX
To do this, connect a cable from the Ethernet port on the
management station to the LAN Port of the Internet
Firewall.
3 Switch on the Internet Firewall.
To do this, connect the power adapter to the port on the
back labeled Power. Do not use a power adapter other
than the one supplied with the Internet Firewall.
4 Wait for the Power LED to stop flashing.This takes
approximately 90 seconds.
5 Follow the initial configuration steps as described in
Chapter
6 Disconnect the management station from the Internet
Firewall and reconnect it to the main Ethernet network.
In some cases, you may have to restart the management
station after reconnecting it.
7 Attach the Internet Firewall to the LAN (see
continue with configuration.
D C
PTIONAL IRECT ONNECTION
3.
Chapter 3) and