D-Link DES-3624 Series User Manual page 91

Stackable NWay Ethernet Switch User's Guide
Select the desired device in the Switch field, the desired setting in the Ports field, and the desired increment
setting in the Update Interval field: 5 sec, 15 sec, 30 sec, 1 min, or Suspend.
The statistic counters displayed are defined as follows:
Speed If the link is up, the speed and duplex status will be displayed; if the link is down "-" will be
displayed.
% Utilization This shows the percentage of available bandwidth each port is using over the amount of
time specified by the update interval. For example, when a 10 Mbps port is relaying packets at 5 Mbps, the
utilization is 50%.
Bytes Recv. The number of good bytes received. This also includes local and dropped packets.
Bytes Sent The number of good bytes sent from the respective port.
Frames Recv. The number of good frames received. This also includes local and dropped packets.
Frames Sent The number of good frames sent from the respective port.
Total Bytes Recv. The number of bytes received, good and bad.
Total Frames Recv. The number of frames received, good and bad.
Last Seen MAC The MAC address of the last device that sent packets over this port.
Using the Console Interface
Figure 6-47. Port Traffic Statistics screen
91