Firmware And Configuration Update - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide

Firmware and Configuration Update

To update firmware or change a configuration file, fill in the requested information above and then click
the Apply button.
The information is described as follows:
Software Update Mode & TFTP Server Address:
Software Update Mode Set to either Network or SLIP. Determines whether the new firmware code
should be obtained through the Ethernet network or through the console port.
TFTP Server Address The IP address of the TFTP server where the new firmware code is.
Last TFTP Server Address This read-only field displays the IP address of the last TFTP server
accessed.
Update Management Module Firmware:
Firmware Update Determines whether or not the Switch should download its new firmware code
the next time it is booted.
File Name The path and the name of the file which holds the new firmware code on the TFTP
server.
Web-Based Network Management
Figure 7-41. Firmware and Configuration Update window
143