D-Link DES-3624 Series User Manual page 80

The fields you can set are:
V-ID Enter a VLAN ID from 1 to 4094. This is the VLAN that will be defined on this screen.
VLAN Name Description of the VLAN.
Tag/Untag Toggle between "T" for tag and "U" for untag for each port.
Egress Position the cursor over the dash "-" representing the appropriate port number and press <space
bar> to select "E" for Egress, or leave the dash "-". An E designates the specified port as a static member of
the VLAN. A dash means the port is not given VLAN membership for the VID entered above.
State Toggle between Active and Inactive.
Choose Browse 802.1Q VLAN Entries at the bottom of the 802.1Q Static VLAN Settings screen to access
the following screen:
80
Figure 6-36. 802.1Q Static VLAN Settings screen
Stackable NWay Ethernet Switch User's Guide
Using the Console Interface