Setup Field(S) - Motorola Symbol DS6708 Product Reference Manual

14 - 26 Symbol DS6708 Digital Scanner Product Reference Guide
Send Data (continued)
Send Next 19 Characters

Setup Field(s)

Setup Field(s) Definitions
Table 14-1
Parameter
Move Cursor
Move Cursor To a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Scan the Move Cursor To Character on page
printable ASCII character from the
on page 14-86. When this is used, the cursor moves to the position
after the matching character. If the character is not there, the rule fails
and ADF tries the next rule.
Scan this bar code to move cursor to the beginning of the data.
This parameter moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is 'A', then
the cursor moves past 'A', 'AA', 'AAA', etc. Scan the
Past Character on page 14-27, then select a character from the
Alphanumeric Keyboard beginning on page
not there, the cursor does not move (i.e., has no effect).
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
Scan one of these bar codes to select the number of positions back to
move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. These
values must be set using the prefix/suffix values in
7-19.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Send Next 20 Characters
Description
14-27, then any
Alphanumeric Keyboard beginning
Move Cursor
14-86. If the character is
Table 7-4 on page
Page
14-27
14-27
14-27
14-28
14-29
14-29