14 - 6 Symbol LS2208 Product Reference Guide
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on
set the pause scan a two-digit number (i.e., two bar codes), to represent a 0.1 second interval. For example, scan
bar codes 0 and 1 from
second delay. To correct an error or to change a selection, scan Numeric Cancel on
Begin New Rule
Scan this bar code to start entering a new rule.
Save Rule
Scan this bar code to save the rule you entered.
Appendix D, Numeric Bar Codes
Pause Duration
Begin New Rule
page 14-24
inserts a pause in the data transmission. To
to insert a 0.1 second pause; scan 0 and 5 for a 0.5
Save Rule
page
D-3.