Motorola Symbol LS2208 Product Reference Manual page 95

ACK/NAK with ENQ
This combines the two previous options. For re-transmissions of data due to a NAK from the host, an additional
ENQ is not required.
XON/XOFF
An XOFF character turns the scanner transmission off until the scanner receives an XON character. There are two
situations for XON/XOFF:
•
The scanner receives an XOFF before it has data to send. When the scanner has data to send, it waits up to
Host Serial Response Time-out for an XON character before transmission. If it does not receive an XON
within this time, it issues an error indication and discards the data.
•
The scanner receives an XOFF during a transmission. Data transmission then stops after sending the current
byte. When the scanner receives an XON character, it sends the rest of the data message. The scanner
waits up to 30 seconds for the XON.
ACK/NAK with ENQ
XON/XOFF
RS-232 Interface 6 - 17