Connecting A Synapse Cable Interface; Removing The Interface Cable - Motorola Symbol LS2208 Product Reference Manual

Connecting a Synapse Cable Interface

NOTE See the Synapse Interface Guide provided with the Synapse cable for detailed setup instructions.
Symbol's Synapse Smart Cables enable interfacing to a variety of hosts. The appropriate Synapse cable has the
built-in intelligence to detect the host to which it is connected.
To Host
Synapse Smart Cable
Synapse Cable Connection
Figure 1-3
Plug the Synapse adapter cable (p/n
1.
Interface Cable on page
Align the 'S' on the Synapse adapter cable with the 'S' on the Synapse Smart Cable and plug the cable in.
2.
Connect the other end of the Synapse Smart Cable to the host.
3.

Removing the Interface Cable

To remove the interface cable:
Unplug the installed cable's modular connector by depressing the connector clip with the tip of a screwdriver.
1.
Carefully slide out the cable.
2.
Follow the steps for
3.
25-32463-xx)
1-3.
Installing the Interface Cable on page 1-3
Synapse Adapter Cable
To Scanner
into the bottom of the scanner, as described in
to connect a new cable.
Getting Started 1 - 5
Installing the