User-Programmable Supplementals; Upc/Ean/Jan Supplemental Redundancy - Motorola Symbol LS2208 Product Reference Manual
User manual
Hide thumbs
Also See for Symbol LS2208:
- Programming manual (5 pages) ,
- Quick start manual (3 pages) ,
- Product reference manual (345 pages)
Table of Contents
Advertisement
12 - 12 Symbol LS2208 Product Reference Guide
User-Programmable Supplementals
If you selected a Supplemental User-Programmable option from
12-9, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the
numeric bar codes beginning on
prefix. Then select the 3 digits using the numeric bar codes beginning on
UPC/EAN/JAN Supplemental Redundancy
If you selected Autodiscriminate UPC/EAN/JAN Supplementals or one of the supplemental modes, this option
adjusts the number of times to decode a symbol without supplementals before transmission. The range is from two
to thirty times. Five or above is recommended when decoding a mix of UPC/EAN symbols with and without
supplementals. The default is 7.
Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes beginning on
D-1
in
Appendix D, Numeric Bar
change a selection, scan Cancel on
page D-1.
Select User-Programmable Supplemental 2 to set a second 3-digit
Supplemental User-Programmable 1
Supplemental User-Programmable 2
Codes. Include a leading zero for single digit numbers. To correct an error or
page
D-3.
UPC/EAN/JAN Supplemental Redundancy
Decode UPC/EAN/JAN Supplementals on page
page D-1.
page
Hide quick links:
Advertisement
Table of Contents
