Download Print this page

Razor W15110710003 Replacement Procedures

Vector battery

Download this manual

Required Tools: (Not included)

A. Phillips screwdriver

WARNING

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect

charger before conducting any assembly or maintenance procedures. Failure to follow these

steps in the correct order may cause irreparable damage.

Step 1

Using a Phillips screwdriver, remove two (2) screws from

the battery cover on the right side of the unit.

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.

REPLACEMENT PROCEDURES

Step 2

Locate and disconnect the battery and charger port

connectors from the controller.

VECTOR BATTERY

PART # W15110710003

Need help?

Do you have a question about the W15110710003 and is the answer not in the manual?

Page 1 Locate and disconnect the battery and charger port the battery cover on the right side of the unit. connectors from the controller. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Page 2 Step 5 Reverse the steps. ATTENTION: Charge battery 8 hours before using. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.